Does anyone know if reproduction Alluminum Headliner trim for the 67 is available. Mine is pretty scratched up. I searched the forum but could not find an answer. :confused:

Thanks,

No they don't reproduce them. I got lucky and found a nice set on a parts car at a swap meet, stole them for $20.

Aluminum trim is pretty easy to work with if not full of dents. I use 80-100grit on a block to remove the anodizing then 220 grit wet on a block, then 800 grit wet on a block then polish by hand...Makes it easier to polish if you sand in 1 direction.

Thanks for the replies. I may try polishing these, or maybe sending them out to one of pros and have them polished and coated.