need help hooking up horn in 70 camaro with stock steering column and momo wheel. got car with no horn , i added horn to engine compartment and a relay to operate it but cant find wire in steering column to hook up to. can i run a wire to the button on the steering column? it seems like it would kink after a while. any suggestions are welcome, thx

Check out nastyz28.com and scroll down to the bottom of the opening page. They have a wiring diagram for a 70 camaro. Hope this helps.

thx i just need to know on a stock steering column does the wire just run up through it (seems like it would get twisted) or is there a hub of some kind?

If I am not mistaken the wire for the horn is part of the harness that runs to the turn signal switch. The button that operates the horn is also mouted in the turn signal switch.

There's a plastic ring/hub with a copper face on one side that sits under the steering wheel. When you push the horn it pushes a spring loaded plunger through a hole in the steering wheel hub and makes contact with the copper ring. I want to say the horn wire is green, but don't hold me to that. I'm gettin' old. ;)

Mark

thx i have to take it apart again, its missing a short wire from the horn button to that ring. does anyone have the wiring diagram for the steering column wires?

Not sure if this will help you or not. There's 3 pages of info.

http://www.camaros.net/forums/showthread.php?t=121430

All the wires for the horn, turn signals, emerg. flasher etc. are in one harness. The one that isn't attached to the turn signal assy. should be the horn wire. ;) Someone may have cut it and stuffed it down in the column.

Mark

thx i think the previous owner cut the wires, thx for pics also !