View Full Version : HELP...No power on any circuit.....


johnm
Apr 5th, 09, 08:07 PM
I started my 67 Camaro today and was backing it out of the garage. The engine died (cold) and when I went to restart it.....nothing happened.......the horn, lights...nothing is working.

The only thing I have done recently is by-pass the neutral safety switch (it is bad) but connecting the wires together which went to the switch....but it has started ok since then..

I checked out the car....the battery is fine...
Pos wire from battery to the solenoid is tight....
The starter will engage if I jump it with a screwdriver....

Still no lights or anything....electrical is not my strong suit.........any ideas?

Did I blow a fuse or something....?

Everett#2390
Apr 5th, 09, 09:35 PM
Check two places - the junction block next to the battery and horn relay buss bar.
Dsiconnect ground cable and remove the red wires from these places and wire brush everything and reassemble.

stellar
Apr 6th, 09, 01:08 PM
Got fuse links on the starter? Check em

john68
Apr 6th, 09, 01:13 PM
Got fuse links on the starter? Check em

Not on a 67, they are at the horn relay

stellar
Apr 6th, 09, 01:34 PM
thanks