I have heard some here say that their Dynomax 86001 headers fit a smallblock in a 67-69 without any problems.86118 is the application for 67-69 camaro,and some say this hits the PS box.Can anyone tell me which ones fit best?Thanks

I will confuse you even more. I have the 85001's (non coated, just rusted) in my '67 and they fit fine. No clearance problems with anything under the hood. I have about 1/2" of clearance between the #3 pipe and the steering box.



------------------
-Funk
My '67 RS (http://www.funkconsulting.com/67camaro)

Ok,that makes sense,i think the 86001 is the same as the 85001 exept 86001 is coated.I think im going to try the 86001.I seem to remember that the 86118 will hit the PS box.Thanks

No Problem. But, let me know how they fit because I will be replacing the current ones with coated ones in the spring.



------------------
-Funk
My '67 RS (http://www.funkconsulting.com/67camaro)

Order Hooker Headers direct from Jet-Hot. They will fit fine, if you have the correct frame and engine mounts.

------------------
69 Camaro Z28 "clone" - 327 AT
"461" camel back heads,
edelbrock , hooker, ultradyne cam, stewart,
TRW etc.
Vintage Air (not yet installed)
700R4 TPI transmission