01somta
May 17th, 09, 08:50 PM
I have a Crane solid roller p/n 168601, what material should my dist. gear be? I have the stock MSD 85551 iron gear on there right now.
Thanks Dustin
Thanks Dustin
|
foreverlookin May 17th, 09, 08:55 PM What does Crane recommend? Was there any lititure with the cam? 01somta May 17th, 09, 08:56 PM What does Crane recommend? Was there any lititure with the cam? I bought the motor built, Crane cams website is no long working?? Vegas69 May 17th, 09, 09:07 PM Do you have the cam card? 01somta May 17th, 09, 09:08 PM Do you have the cam card? no, sir Vegas69 May 17th, 09, 09:19 PM Bingo http://www.prager-gmbh.de/CraneCams/CraneCatalog/Page362-367.pdf Crane is known for press on cast gears on their rollers. I have one as well. You can use a standard gear or melonized. I run the melonized to be safe. No brass gear is required for this cam and I would firmly recommend against it. 01somta May 17th, 09, 09:31 PM Bingo http://www.prager-gmbh.de/CraneCams/CraneCatalog/Page362-367.pdf Crane is known for press on cast gears on their rollers. I have one as well. You can use a standard gear or melonized. I run the melonized to be safe. No brass gear is required for this cam and I would firmly recommend against it. Thank you, I have looked for months for some info. :hurray: | ||