I just wanted to know has anybody on this site ever installed a power trunk release solinoid on their first gen camaro? If so can u post up pics and info on how u installed it. I want to install one just for security reasons due to a bad experiance i had a month ago with my subwoofers.

Thanks
Any help and advise will be greatly appreciated.

a

They are pretty simple. Just unbolt the old latch and bolt the solenoid powered one in. Then Run a power wire.

This is very simple--you unbolt the old one and bolt in the new one. Find a ground and then find a hot wire for power.

They are on ebay all the time and go for $25 to $60.

I had posted up a question about what cars to find these in a while back and i cant find it for nothing. what I remember is that Fords used a similar set up in the 70's if you want to look for doner cars - so far no luck for me 70s car are hard to find even down south.

Simple latch install, I did not install a latch button, but just wired it to the trunk channel on my remote control / security system.

http://musclerodzstore.com/index.asp?PageAction=VIEWPROD&ProdID=339