viper69z28
Jun 23rd, 09, 02:01 PM
Hey guys just wondering if anyone has put in there 69 a Super T10 with a Hurst comp shifter and could use your stock console.Just wondering before I put it in Thanks Irvin
|
View Full Version : Super T10 in 69 Camaro viper69z28 Jun 23rd, 09, 02:01 PM Hey guys just wondering if anyone has put in there 69 a Super T10 with a Hurst comp shifter and could use your stock console.Just wondering before I put it in Thanks Irvin SixtyAte Jun 23rd, 09, 03:05 PM Irvin... Yes...I have a Super T-10 in my 68 without any mods needed Kev ddx77 Jun 23rd, 09, 03:10 PM Yes, I have a super t-10 and Hurst Shifter in my 69 and I am ready to put the stock console back in it. Seems to fit and function perfectly so far, I haven't bolted it in yet... 71maligreen Jun 23rd, 09, 04:50 PM Irvin... Yes...I have a Super T-10 in my 68 without any mods needed Kev what shifter are you useing and did you use a 400 yoke?? SixtyAte Jun 23rd, 09, 05:47 PM Tony... I'll have to check the paperwork on which shifter that I installed to the Super T-10 because it was about seven years ago :) The yoke used was a standard one normally on a 350 turbo trans. The cross member bolted right up also. I have the paperwork on the Hurst in the garage so give me a little while to dig it out. Kev SixtyAte Jun 23rd, 09, 07:54 PM Hurst Shifter # 3914339 Install Kit # 3738609 Kev viper69z28 Jun 23rd, 09, 11:59 PM Thanks guys I appreciate all the help.I will be installing them very soon Thanks again Irvin SixtyAte Jun 24th, 09, 03:54 AM Here is a link with some great BW T-10 info... http://fiedlerh.home.att.net/BW.htm Kev The Camaro Guy Jun 24th, 09, 05:42 AM I installed the T-10 transmission with a BB in my 69. I needed modification plates to have the shifter in the same location as a Muncie. I contacted Crash Enterprises in Wisconsin and he has the plates that just bolt on to the side of the transmission with a Hurst Comp shifter. It is now exactly where the shifter should be with the console. You can move the console to accomodate the shifter so you don't have a problem hiting the console if you don't do any mods. Mine took the stock 400 automatic drive shaft, but had to be cut down. The transmission was out of a 78 Trans Am. A SB might have a slightly different location as a BB. Hope this helps. _________________________________________ 4-1969 SS Camaros 1-1969 SS Chevelle 1-1969 C-10 427 1-1999 Z-28 Convert 1-2005 STS viper69z28 Jun 24th, 09, 10:00 PM Hey Bruce thanks for chimming in.I forgot to say I was putting in a big block.I have some plates already mounted to the shifter and was wondering if the ones you used were different.Thanks Irvin viper69z28 Jun 28th, 09, 10:47 PM Hey Bruce just wondering if you have there number.I tried to find it but came up empty.Thanks Irvin |