I want to wire up a ford 2 speed fan to my Camaro and I would like to wire it with both speeds on a separate switch - no thermostat switch, just direct. Can anyone give me some advise - and what size relays do I need to use?
Thanks for any help you can give.

Joe

Joe,

Im running the same set up. I used a 3 postion toggle switch. Up is on/middle off/down on.
Picked it up from Kragen for like 5 bucks or so. The low speed relay I used a 30 amp one that you can get for like 5-7 bucks all day long. The high speed I picked up a 75 amp Bosch
from ebay. I think it was around 25-30 bucks if I remember right?? Search ebay for Bosch 75 amp relay and you will find it. So far this set up has worked great!

I have the same fan that I removed from a wreck. I have plans to install this in the future when I get the car running. If I remember correctly there are three wires, all of a different color, what does each wire control? Which wire color is ground, and which wire color is high speed? I am no electrician so I will also need help with this. Thanks in advance.
Bill