anyone have suggestion as to where to get a manifold modified to accept fuel injectors. I have a new tall deck manifold which is why I'm looking to modify mine vs buying a different one.

When I was shopping for a new FI system I found several vendors who would install the bung holes on your existing manifold. I'd be making some calls. Sorry, I don't have links handy, and because my manifold is a Torquer ll with the twisted carb mount and I wanted to keep it, I went with Retrotek. It's TBI and 1200 cfm. Might work for you. Here's a look,,,
http://epitomesrebuild.com/images/266.JPG

And then I moved the regulator from the tank to the engine. The Retrotek is a flow through design so I took advantage. Now I can purge air quickly when drag racing with little fuel in the sump.
http://epitomesrebuild.com/images/311.JPG

Thahks Fred....I got some calls in and we'll see. I purchased a Accel Gen 7 with a throttle body..so need bungs.

Wilson Manifolds did mine.
http://www.wilsonmanifolds.com/

---Bill.

I've never used them but you could try: http://www.hotrodsolutions.net/IntakesEFI.html

I've used Force Fuel Injection (http://www.force-efi.com) a few times, nice work, fast service.

Jody

Thx guys I'll pursue them all and see what works best.