View Full Version : 67 deluxe sail panel courtesy light cutouts


anthony hisle
Jul 10th, 09, 12:39 PM
i have changed my interior to the deluxe.its a 67 camaro it had standard interior & im putting in the deluxe courtesy lights in the sail panels.i have no clue as where to mount the courtesy lights or if they have a i inch hole cut in sail panel or just a small hole for wire.i would appericate it very very much if some one could show me a picture of sail panel thats used for the deluxe interior,or maybe the measurements where the light sits on the sail panel.i have seen a thousand 67 camaros at shows but they either have standard interior or they deleted the sail panel courtesy lites & used the one over head.i dont want to delete the courtesy lights on sail panel.i want the ones on sail panels & not the one over head.i just want to put lights in correct place.as alway thanks in advance for any help. you guys are great.thanks

Sauron67MM
Jul 10th, 09, 01:00 PM
The light housings only go in one place on the inner structure behind the s. panel so you can't go wrong. Did you get a conversion kit?

rogerh
Jul 10th, 09, 09:34 PM
The easy answer to one of your questions is the hole is 2 3/8". Sense the panel is odd shaped its hard to tell you how to measure to find the center of the hole. I will start by saying the center is 4 3/8" from the top and 8 3/4" from the center of the front edge. If you can understand those dimensions if I were you I would make a cardboard templet of your sail panel and make a hole and see where you come out. From that point you can make your adjustments. Like was stated above there is only one place they will go on the sail panel because the light bazel is actually screwed the the matel behind the sail panel.

Roger

anthony hisle
Jul 10th, 09, 11:18 PM
thanks thats the measument i was looking for thanks a million.you all are great.

Lost in the 60's
Jul 11th, 09, 06:59 AM
Here's a pic of where the light housing mounts behind the panel. The large hole with the 2 tabs is what holds the bezel. The wire comes up from the trunk. If you bought a kit, it should plug right into the original harness with the orange and white plug.
http://inlinethumb37.webshots.com/5604/2610798980100567145S600x600Q85.jpg (http://rides.webshots.com/photo/2610798980100567145VmFfHB)

anthony hisle
Jul 11th, 09, 11:21 AM
super really want to thank all you guys for the help & i really appreciate all the help & the picture will be a big help.thanks