Hello all, The wife and i are close to finishing our first gen 68' camaro and I installed a B&M 350 transmission. I am not sure if i have it installed correctly (lines etc) i have tried searching the web but I am having no luck. I am hoping maybe someone here might be able to offer some advice.

Thanks

Don,
Do you have one of these: http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=camaro6769&Product_Code=HA-F68&Category_Code=ASSEMBLYMANUALS If not you might want to think about it. They are loaded with diagrams of just about everything. I'm looking at my 67 manual and it shows diagrams of the trans including routing of the fluid lines to the radiator, modulator routing and so on.
Richard

Don,

Here is the line routing from the '67 assembly manual. I am sure it is close if not the same..
http://thehoovers.com/images/camaro/autotrans_lines.jpg

PS don't be confused by the straight six in the image. They do that a lot in those manuals. The use the same image with little notes where it would be different for a different option (motor, trans, console ect)

Bill

Hey thanks guys, I just ordered that manual