I just rebuilt my carb and when I went to hook the linkage up I realized that throttle cable is 2 – 3 inches to long. I did a little research and found out it should have rod linkage (69 Z). I know it was binding before I took the carb of but hadn’t got around to figuring out why until know. So, now I know I’m going to have to replace it, should I go with original type linkage, cable or an aftermarket cable?

If its an original resto or close then go with the rod.

If its a pro street, pro touring or hot rod then go back with the cable its alot easier to hook up.

If its an original resto or close then go with the rod.

If its a pro street, pro touring or hot rod then go back with the cable its alot easier to hook up.X2:hurray: