Was wondering if anyone had a idea what's wrong with my Chevy metro
Its the 1.3 and I just had the head shaved - and I replaced the timing belt and water pump - I put the car back together and at first I didn't have any power to the cam shaft sensor - and then after a bit I lost power to the computer. This stinks :)
Any Ideas will be greatly appreciated.

Joe

Sounds like you lost power from somewhere?? Retrace your steps..

well I found the computer had a blown fuse so I replaced that fuse, but I only have power to two injectors ( 3 and 4 ) but NO POWER to ( 1 and 2 ) I am confused.

Sounds like you might have pinched a part of the harness for the injectors..trace the wires from the injectors back and look for a cut or pinched wire??

Got it figured out -- had the timing on the wrong mark :)