I am restoring a 69 camaro i removed my interior the floor pans have only surface rust i took a angle grinder with a wire wheel and cleaned them all is very solid my question is what to cover the pits the surface rust left thanks

Greg,
I just got done ssandblasting the entire underneath of my 68 camaro,I used a product called POR-15 on it and the stuff is really
good. You can brush ,yes brush this stuff on and it will show "0" brush marks.It is made to put directly over a rusted surface but needs some chemical etching. The company advertises in Car-Craft and Hot Rod.If I did
this again I wouldn't hesitate to use it.
I was skeptical but I'll recomend it now !!

thanks for the information it will be helpful but i should have indicated i was talking about the inside floor pans .thanks

POR15 can be used on rust on the insides of cars too.

can i buy por 15 on the internet any where thanks

uh... how about www.por15.com (http://www.por15.com) http://www.camaros.net/forum/smile.gif

------------------
'69 Base Camaro
355, 200-4R trans