Who carries 9/16 all thread rod? Home Depot doesn't.

McMaster-Carr will.

alan

I think my local Ace Hardware does too. You might try yours.

I think I saw some at Lowe's recently.

H.

I always use ace for nuts bolts etc. They keep the best selection in several grades.

Why for you need all thread and not a bolt all thread is lower in grade than any bolt I would think.....

Tom,
See if there is a Fastenal store near you, they should have it.

Why for you need all thread and not a bolt all thread is lower in grade than any bolt I would think.....


All thread can be pretty handy as a spring compressor, a press to install leaf spring bushings in the subframe and so on. I agree that I wouldn't use it for a critical fastener.

Rather than 9/16 inch, you could use 1/2 inch just as easy.

You can all thread in stronger grades but you have to look for it. I get it on-line or at a local fastner place.

I need the 9/16 because thats the size of my spring compressor. I'll try True Value and the local ace hardware Thx

Ill have to say ACE. They seem to always have the everything in terms of fastener type stuff.