|
: transmission line replacement Gary Stoltz Sep 9th, 09, 11:49 AM I'm re-doing my 69 SS/RS and want to change the tranny lines on a turbo 350. I can't find a wrench to remove the lines from the transmission.Does anyone out there know where I can get a wrench for this. Thanks Gary extet@aol.com Fred Ficarra Sep 9th, 09, 12:04 PM Any parts store. Ask for a tubing wrench. Know the size you need. zman1969 Sep 9th, 09, 12:07 PM any flare nut wrench- 1/2" IIRC will work if its on the trans in the car you may need to get a crows foot that is 6 pt -to get up in there with an extension-you may need another wrench to hold the brass fitting from turning too. Sears may carry them if not any Mac Matco or Snapon dealer will, like this: http://t0.gstatic.com/images?q=tbn:-DagdsH7GjuCgM:http://images.toolspot.co.uk/Spanner%2520Sets/8Pc-Crows-Foot-Wrench-Set_2.jpg these are dang sweet to have when you need them! keithl1967 Sep 9th, 09, 06:44 PM X2 on the crows foot... Sears does sell them... | ||