I'm rebuilding a 69 RS/SS and I'm trying to replace the lines on the transmission but need to find a wrench to remove the lines from the tranny. Any help is appreciated. Thanks, Gary

You can use crows foot wrenches. The fit on the end of a 3/8 rachet. Here is a set for line wrenches. They also make them with a regular wrench end. You can probably buy the 1/2" size from Sears also.

http://cgi.ebay.com/ebaymotors/9pc-lot-S-K-Flare-Nut-Crows-Foot-3-8-drive_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el111 6QQhashZitem27aa033915QQitemZ170356062485QQptZMoto rsQ5fAutomotiveQ5fTools

Like he said, crows feet with an extension are the way to go on those fittings, works everytime. Sears usually has them in stock if you have a store near-by.

Like he said, crows feet with an extension are the way to go on those fittings, works everytime. Sears usually has them in stock if you have a store near-by.

Just to get by, Harbor Freight

There is a wrench called a line wrench.It looks like a box end with part of it open to be able to slide over the line. Has facets like the crow's feet.