I had camaro in for wheel alignment after cutting frt springs with Global West uppers,Pass.side came into spec with NO shims,Drivers side has about 1" by the looks of it ? Is it possible that spring is not in correct position or ? Seems like a lot of shims!

Get a tape measure and measure from front upper a arm bolt, (the one with the shims on it) to the ground on each side of the car. Sounds like the LF coil is not seated fully.

Get a tape measure and measure from front upper a arm bolt, (the one with the shims on it) to the ground on each side of the car. Sounds like the LF coil is not seated fully.

^ what he said. Theres a 'slot' that they sit in, in the pocket.

will do thanks guys