Picked up a nice set of 96 Camaro seats to put into my 67. They have the air operated lumbar adjustment, etc. I know several of you guys have made this swap and I'm wondering how you handled the seat tracks. I have the stock 96 tracks as well as a set of 67 tracks. Rather not modify the floor mounting points so should I adapt the 67 tracks to the 96 seats or what ? Thanks

NHB:

I put some '99 or '00 seats in my '68. They're probably the same.

For the front two bolts I made some spacers about 1-1/2 inch high and the seat bolted right on.

For the back two bolts I made some extender pieces out of steel about 2" long to attach to the new seat track rear holes. Then I drilled holes in the steel over the existing holes in the body and bolted it down. I'll take a pic and post it later. Easy.

-Steve

I put the 80s seat in mine and I swaped my tracks over. They should bolt to the new seat