I am getting some chatter from the front of my enigne. I am thinking this might be cam walk. What is the spec on this again? I was thinking I set it .007 or so I don't rember.

I unleased this monster the other day and also blew out the seal on the Weiand water pump seal. Can this be easliy found?

thanks yall.

Do you have adjustable button from outside? As for water pump, go with Stewart Nascar stock pumps.. Sell for about same if not less, unless you running chrome.

Most spec them at .001 to .005".

Jody

Yes I have the screw from the outside. The screw is a NPT. It gets tighter as it goes in. It never would go in far enough. I assumed it was just an inspection hole. The riming chain cover is a two pc. The roller button had some shims that came with it.

Would the chatter noise coming from the front of the engine be the cam gear rubbing on the block?

thanks again yall for taking the time to answer my questions.

Check this out:

http://www.chevyhiperformance.com/techarticles/49161/

great article thanks