I am finally ready to rebuild my engine and I wanted to make my final decision about heads,the bare castings for these two heads are the same price for bare castings are the same but assembled the Iron Eagles are more. Anyways I wanted you guys opinion on this subject,and why you choose the heads you did.
Thanks Blake

I've had both. The Iron Eagles have better flow, especially on the exhaust side, right out of the box. For this reason alone I would choose the Iron Eagles.

Jody

ditto on the Iron Eagles having better flow.

also, the sportsman's are 220cc, which is more suited to mid range-upper end power.
The iron eagles have 165,180,200,220 cc options.

Actually the Sportsman II's are 200cc, but I agree, if I had it all over again, I would do the iron Eagles. Flow better out of the box than the SPII's.

------------------
383 Speed-O-Motive stroker kit with Holley 750DP, RPM intake,MSD6a box,World Products Sportsman II heads, ported and polished with 2.02/1.60 valves,64cc,TRW forged pistons with 10.7:1 compression, Comp Xtreme 284 cam,Crane pushrods, Comp Cam 1.6 full roller rockers,ATI damper, 40 series Flowmasters, 4.11 gears with TH350 and Hughes 3000 stall.