Does it matter what post on the Horn Relay buss bar I connect the wire that goes to the Breaker on the firewall for the Power top? Also does it matter if that wire goes to the top post on the breaker or the bottom. I would assume the breaker on the firewall is non-directional.

:beers:

Buss bar doesn't matter, breaker doesn't matter. That was easy.

Thank you just wanted to make sure there is a lot of Juice there
:)

I too had the same question when I did mine. I ran the power from the bus bar over the front fender (behind the engine bay=hidden) and it came out near the hindge. I then connected it to the top of the breaker. The wiring harness that goes through the fire wall I connected it to the bottom of the breaker. At least that is the way it shows in the AIM.

Brandan-