I did a 68 years ago and sold it like a dummy!! Now i have picked up 68 plan jane so i dont have to worry about making it factory. I am a little overwhelmed on this one needs almost all metal work i am going to be making a jig in next couple weeks. My question is where should i start on the metal work? floor pans and work out and up? Any suggestions let would help. Below is listing of parts i know need replaced.

Floor pan
Rockers
quarters
section of roof

that is what i know for new till i start blasting!
Thanks in advance!!

First off, welcome to the site :thumbsup:

As far as projects go, each usually has a sequence that makes more sense to some than others once you get going on it.
Sometimes because of work area, money, time or ???

I would suggest you start by searching/reading through a few of the great threads on here by others doing the exact work you're looking at.
Here's just one - http://www.camaros.net/forums/showthread.php?t=121480
Join in the threads and ask questions - the poster will be glad to help to you I'm sure - it's the nature of this site!

I can general tell you that you're going to want ot study the car for damage.
Stabilize the structure well - by jig or bracing or both.
And then begin the archiology of finding out what needs to be removed to get to what you need/want to replace.

Take LOTS of photos allong the way !!!
Both for us :D and for future reference.
Start a thread like some of the others with your project, proposal and progress and have others chime-in with information and guidance as you go.

I think you'll be surprized how smooth things go if you plan ahead and use good techniques and information along the way :thumbsup:

Thanks for the reply i am really looking forward to doing this again. I have talked wife into letting me build a garage for it. I did that last summer i did a 32X40 as a shop. Of course i had to get a second job. I am going to take alot of pictures and start a thread. Everyone on here is great help with each other not a bashfest like most boards.
Thanks again for reply

32X40!! Man I'm jealous of you guys with all that space. My entire property is 20X100. My garage was buit to 19.5X22. Welcome to New York:angry:

I started a thread for my build! I am taking advice! Thanks for it

32X40!! Man I'm jealous of you guys with all that space. My entire property is 20X100. My garage was buit to 19.5X22. Welcome to New York:angry:


i feel your pain, i am so jealous of these guys with the huge shops on here.


and welcome!! its good to see another 68 being saved.

It took me a year to save the money and i built the thing myself. Only two things on the garage i didnt do Lay the block and Pour the slab. I knew i would jack those up!

I started a thread for my build! I am taking advice! Thanks for it


Link to rebuild thread - http://www.camaros.net/forums/showthread.php?t=182270

:thumbsup: I'll try to follow along and fill in what I can.

Good luck to ya.