I need the brake lines that run to the rear and splits to the rear axle. And run to I guess the Master Cylinder. Would this be what I need guys. I havent seen the car yet but I will saturday and tell me if I need to ask this questions then. Here is a link I found of some will this be the way to go?


http://www.heartbeatcity.com/store/product/12323/Camaro-Rear-brake-line-kit--all-SS--69/

That's what I put on mine.... 2-piece kit, but had to buy a Female\Female barrel adapter to mate them together under the car near the drivers door area.
There is a hole in the frame right there for a brake line clamp so I used an Adel clamp sized to fit over the adapter.

I believe those are the two lines that go on the rear diff. The front to rear line is usually described as such and offered as one piece or two. You will need the front to rear line , the rubber hose and the rear differential lines to get from the distribution block to the wheel cylinders.

Jeff

Here is the one from the front to back. It is bent in half for shipping purposes. It can be straighten with no problems. Just take your time bending it.

http://www.heartbeatcity.com/store/product/12307/Camaro-Front-rear-brake-line--1pc-SS--69/

I recommend Right stuff http://www.getdiscbrakes.com/RightStuff/Default.aspx for all your brake lines and components. You can get a 1 peice or 2 piece (with valve on subframe) rear brake line.

I appreciate your responses. Does heartbeat city have a pretty good product? I dont want to go cheap or overseas as much as i can.