hi guys im new here so bear with me i have a 93 lt1 with the stock exhaust i also have a 94 v6 with flowmasters on it i was wandering if the flowmasters off the v6 will bolt onto the lt1 thanks alot

Mufflers don't usually attach with bolts. Usually the piping slips into the mufflers and the muffler is held in place with clamps. Can also be welded. If your flowmasters are of the same length and shape as the ones you want to replace and the exhaust piping is the same diameter it should fit, but not without some cussing. It's a royal pain to separate usually rusty slip-fit mufflers from the usually rusty pipes without buggering one or the other or both up.

hey thanks alot for the info