Sep 23rd, 10, 06:48 AM
The only place in my area that polishes window moulding is 6 months behind. Is there post here that will give in detail the materials and procedure to do my own window moulding. I have a 6 inch bench grinder. If not a previous post maybe some one can give me some info. I trying to do as much of my car as possible. As always, thanks Team Camaro, Wayne
Sep 23rd, 10, 09:12 PM
Read through Buffing and polishing instructions on Caswells site.
I did all the stainless on my camaro with a buffing wheel and green compound. It came out really well.
Sep 23rd, 10, 09:20 PM
I used this kit in the link from Eastwood and they came out good. It has a good instruction booklet with the kit.
Sep 24th, 10, 01:03 AM
x2, what Roger said..:thumbsup:..except I went with 8" buffing wheels. The reason being, a regular buffing motor has extended shafts compared to a bench grinder, for better access to your work. When fitted to a bench grinder, the bigger wheel helps to keep the part being buffed farther away from the motor with greater maneuverability.