YouTube - 489 BBC in 69 Camaro idle. Lunati 60204 cam.

Your car?

Tell us more about the combo.

Sounding nice! Music to my ears!!!

sweet music to the senses!

Sounds sweet!!!:thumbsup:

Your car?

Tell us more about the combo.
Yes its mine. Its your basic 489 with Brodix RR oval heads. 10.2 SRP Pistons with good street manners. Forged Eagle crank and rods (overkill but room to grow). RPM air gap. TH400/Turbo action 3000 stall. 4.10 gears. 2" Hooker Headers. About 350 miles into the new build. Very happy with it so far. Lots of fun around town but definitely needs some drag radials.

I have no idea what kind of power I'm making. But its plenty for now.

Sounding nice! Music to my ears!!!
Thanks!! I like the flowmasters at idle. But at cruise they are killin me. Time to shop around for something different.

Sounds great!!!! Whats the specs on that cam?

Yes its mine. Its your basic 489 with Brodix RR oval heads. 10.2 SRP Pistons with good street manners. Forged Eagle crank and rods (overkill but room to grow). RPM air gap. TH400/Turbo action 3000 stall. 4.10 gears. 2" Hooker Headers. About 350 miles into the new build. Very happy with it so far. Lots of fun around town but definitely needs some drag radials.

I have no idea what kind of power I'm making. But its plenty for now.

Nice combo very close to mine on the motor. (489 + Brodix RR + SRP + RPM Air Gap + Hooker)

Hope mine sounds as good when it gets running.

Sounds great!!!! Whats the specs on that cam?
Cam Style Hydraulic flat tappet
Basic Operating RPM Range 2,200-6,400
Intake Duration at 050 inch Lift 233
Exhaust Duration at 050 inch Lift 241
Duration at 050 inch Lift 233 int./241 exh.
Advertised Intake Duration 276
Advertised Exhaust Duration 284
Advertised Duration 276 int./284 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.554 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.572 in.
Valve Lift with Factory Rocker Arm Ratio 0.554 int./0.554 exh.
Lobe Separation (degrees) 110

That sure sounds awesome. It sounds like a bigger cam profile then you have.... Man it sounds better then my Comp Cam XR286R Solid Roller.

Yep great sound and an even better body and paint. Awesome!

Now back to the cam. YOU POSTED IN THE PERFORMANCE thread! You are in big trouble.:D I made that mistake too.

When you ditch the flat tappet cam for a roller you can use much more cam. Besides what you have now is pretty mild for 490 Cu In.:yes:

Now, exhaust noise. I didn't see the pipes exiting under the bumper. The car seems to have down turned pipes before the axle. If so, the mufflers aren't the problem. But what do I know? I took off my X piped 3" system for open headers. Great way to cruise the drive-in.:thumbsup:
(kidding. Been drag racing.)

Next, the only other thing I would change is to dull that shine behind the rear tires with RUBBER.:beers:

Sounds great -- there's something about black -- I've often thought what mine would look like and seeing yours makes we want to change mine!!

Your car looks good and sounds even better, can't beat the sound of a thumpy cam !!!:D
You ever go to the drags at Bithlo?? Any good cruise in's over your way? Maybe one day we can hook up, I'm over in Cocoa.

Yep great sound and an even better body and paint. Awesome!

Now back to the cam. YOU POSTED IN THE PERFORMANCE thread! You are in big trouble.:D I made that mistake too.

When you ditch the flat tappet cam for a roller you can use much more cam. Besides what you have now is pretty mild for 490 Cu In.:yes:

Now, exhaust noise. I didn't see the pipes exiting under the bumper. The car seems to have down turned pipes before the axle. If so, the mufflers aren't the problem. But what do I know? I took off my X piped 3" system for open headers. Great way to cruise the drive-in.:thumbsup:
(kidding. Been drag racing.)

Next, the only other thing I would change is to dull that shine behind the rear tires with RUBBER.:beers:
Yeah I know what you mean about the cam. I'm happy with this cam but in a couple years I will go roller. I will have fun with this one til then. Traction will be the first issue to deal with.
The exhaust does have tail pipes and they are angled down just aft of the rear tires. But I dont have an X pipe either yet, so that may help the noise levels come down a bit too.

Your car looks good and sounds even better, can't beat the sound of a thumpy cam !!!:D
You ever go to the drags at Bithlo?? Any good cruise in's over your way? Maybe one day we can hook up, I'm over in Cocoa.
Thanks! I used to go to Speedworld occasionally as a spectator. I plan on going to "Night of Fire" coming in November to see some crazy stuff.

I miss out on most cruise ins since I work weekends, but I know Casselberry has something every Friday and then there is always Old Town on Saturdays.

My inlaws live in Merritt Island so I go there quite often. Might have to swing by Cocoa sometime.

Get with me when you do, we have a cruise in 3rd Saturday Beef O Brady's at MI,Fla