I have a Lunati H-Roller Cam in my car (268/276 duration) (489/503 Lift), I think that i would need to go a bit higher, Also what kind should i go for this time Crane, Comp, Isky...etc, or perhaps another Lunati, What do you guys think, and what dur/lift should be for a 383 Stroker with aluminum heads, victor jr. and full M.S.D. Ignition, And decent headers (Edelbrock...but soon switching to S.L.P.'s or Hooker)with a cat back Borla Exaust?

Need compression ratio and stall RPM. Both are pretty important to know when picking a cam.

If you have say 10-1 compression +- and a converter that`s around 3000-3200 then look at something in the 234-238@.050 .530 lift 110 sep.

Call Tim or Harold at www.ultradyne.com (http://www.ultradyne.com)
They make a great cam!!

The compression is 10.0 and i also have 2400 stall, maybe this will help?

Big Red is right IMO. www.ultradyne.com (http://www.ultradyne.com)