clm69z28
Dec 3rd, 10, 09:20 PM
I would appreciate any feedback whether this is an original stamping or not. The owner claims that it is but only has verbal confirmations. Any help from the forum members would be welcome.
|
Kurt S Dec 3rd, 10, 10:26 PM I think it's real. Gotta VIN to go with it? (you can email it if you'd rather not post it) clm69z28 Dec 3rd, 10, 10:49 PM No- owner says nothing more than 19N......is visible. Pics don't show anything either, but I will keep investigating. What are your clues to its authenticity? Lawrence Shaw Dec 4th, 10, 04:37 AM I am sure you have already checked this but what is the casting number and the casting date? clm69z28 Dec 4th, 10, 08:05 AM 010 block with a casting date E 13 9. clm69z28 Dec 5th, 10, 09:52 AM Anybody else have input? I know there has been some recent developments in veriying the factory broach marks; does anybody know who does that on the west coast? rafbody Dec 5th, 10, 05:52 PM Kurt posted above and asked if there was a VIN to go with it. He is your best contact as far as getting verification on the stamp. 68camaroz28 Dec 6th, 10, 03:11 PM Kurt posted above and asked if there was a VIN to go with it. He is your best contact as far as getting verification on the stamp. The op stated earlier Russ that "No- owner says nothing more than 19N......is visible. Pics don't show anything either, but I will keep investigating." But your question brings out what if the vin off the car was given to Kurt? Would that be beneficial to verify at least time frames look correct? Maybe even seeing just what is stamped (the 19N for correctness) might assist. rafbody Dec 6th, 10, 05:23 PM If you have a good high res picture of the vin stamp I would suggest emailing it to Kurt. clm69z28 Dec 6th, 10, 06:47 PM Thanks for the suggestion-I had a rather poor one that I sent to Kurt earlier today. I don't know how much help it will be but maybe with his experience he can make it out. cortezsilver Dec 7th, 10, 01:34 PM I thought the 010 blocks were 350. rafbody Dec 7th, 10, 05:43 PM I thought the 010 blocks were 350. They were used for the 302 and the 350 both during the 69 production year. bcm66 Dec 7th, 10, 07:05 PM I thought the 010 blocks were 350. They were used for the 302 and the 350 both during the 69 production year. Check this link. Direct from CRG. http://www.camaros.org/drivetrain.shtml#BlockCast clm69z28 Dec 8th, 10, 07:43 AM BCM 66; I emailed you and Kurt the photos of the vin area and other areas. Any other indicators that you can make out? bcm66 Dec 8th, 10, 10:49 AM clm69z28, Kurt is the expert. If he says it is good, you can take that to the bank. A few things bother me in general with the front pad. But I do not have anything close to the database or experience with DZ stamps that Kurt does. | ||