I had a post on hear a week ago and ya'll helped alot. Thanks for the help! I need to know now were I can get a pivot pin remover. They dont have it at part stores and at the dealer ship. Thanks again for the help.

Get yourself a 10-32 screw about 1" long. Thread it into the pin. Take a pair of pliers and a screw driver and remove pin. Hope this helps.

Ive never taken one this far apart before.Does it screw out or just pull out.

Greeting Kevyg, the pivot pins pull out, the 10-32 screw gives you something to pull the pins out without damaging them. I hope that abundance of reading material gave you an insight into locating and correcting your problem.

Good luck! The Trickster!!!!!!!!!!!!!!!!!!

If you can't get the pins out with the 10-32 screw method, Snap-On makes an awesome pin removal tool. The bad part is that they get about $35 for a tool that is worth about $5!!

Just get some extra screws and try not to break them off in the pivot pins!!

Thanks again for all ya'lls help. And thankyou trickster for all info.