my stoplights do not work at all. when i turn the lights on i have tail lights but still no brake lights. i check all of the wires and connections and already replaced the switch at the pedal, the fuse is good. whats going on? thanks guys

Things to check,do you have turn signals,have you checked the bulbs,they are 1157 two element bulbs,one for running lights,the other for turn/brake lights.Brake pedal switches are usually adjustable make sure it is adjusted,you should be able to hear it click when you mash the pedal down slowly.

yes i have turn signals, yes i have new bulbs, and the brake lights worked after i changed the switch at the pedal but then just stopped working.

Its got to be the switch then.Check for fire coming in to the switch and then fire coming out from switch when you press the pedal.How long ago did you replace the switch?

i replaced it a few months ago

Just check for fire in and out of the switch,I feel sure the switch is the problem.Let me know

RC

Are your brake lights on the fuse block? I know this sounds basic, but if so, check the fuse. Also, the brake switch might be slightly out of adjustment, causing it not to trigger. Finally, the switch could just be bad as was mentioned. You did'nt mention if the running lights were working in the rear. If not, check the grounds at the tailight housings. The sockets actually ground to the housings on the 67-68's, but may be grounded to the trunk floor on other years.

switch is sticking i bet ya gotta put some lube on the shaft