Nov 5th, 99, 04:43 AM
My 69 Turbo 350 has what appears to be a pan leak, but it could be from the dipstick tube O-ring. Any suggestions on getting a perfect seal on the pan and reseating the O-ring (Silicone (which type/brand, etc.)) so this problem will go away.
I've already done this once and wasn't too successful.
Nov 5th, 99, 08:06 AM
I used the yellow permatex and it doesn't leak. I have a buddy how does tranny work on the side, he said that he doesn't use any gasket sealer. I'm not going to use any next time and see how that works.
Favorite Quote - Some people have shrinks. Some people have their garage.