I need the parts diagram to help me put back together a 67 floor shift column. I cant figure out a few small detials. you can email me at cmm@tesupply.com

thanks

Last months car craft mag. had a article on rebuilding a column. complete with a exploded view and parts sources.

Year One has a pretty good break down in their Camaro catalog on the 67-8 columns. I've rebuilt a few of the 67-8 columns, I'll look tomorrow in the shop to see if I can find any manuals with breakdowns I've used. you are right there a couple of parts that aren't real obvious just how they go together. I've been there. Can you be more specific on what part you're having trouble fitting together or do you just need a go overall breakdown or manual to help out? I'll scan you anything I have and send it to your e-mail.
Dave

I dont really know what I have done wrong, but the top of the column is about 1/16 of an inch from allowing me to insert the pin that holds it in place. If that makes any sense to you.

I need any info on how to put one back together I can get. I do not have a year one catalog. Thanks for your post.

I sent the pics and text that should help you get your column back together. Like I said most people have problems assembling upper bearing, lock plate and bowl assemblies, so don't feel bad about it, it takes a little practice. Also Year One only has a 69-78 column breakdown, I was wrong onthat one. If you have problems with the pics or text email me and I'll resend them.
Dave