|
twinlakes Jul 1st, 02, 04:39 AM I wanted to thank all the guys who helped me with my problem http://www.camaros.net/forum/cool.gif . Just a note to tell them that I pulled the tank only to find that the Rag was so brittle that it crumbled in my hand http://www.camaros.net/forum/eek.gif. Now I'm going to reroute the fuel line to see if that helps the gas flow. Again Thanks http://www.camaros.net/forum/wink.gif. RickD Jul 1st, 02, 08:46 AM Great! I have headers and the line runs in the stock location without any problems. ------------------ Rick Dorion 69 RS Conv,355,M20,4.10's and I don't worry about stone chips ( yet ). twinlakes Jul 1st, 02, 04:10 PM Hey RickD what size fuel line are you running and are you using an electric or mechnical fuel pump? RickD Jul 2nd, 02, 05:07 AM I have the stock 3/8" line with a Carter mechanical pump. I also put the thermo-wrap around the line in the engine compartment. ------------------ Rick Dorion 69 RS Conv,355,M20,4.10's and I don't worry about stone chips ( yet ). twinlakes Jul 2nd, 02, 08:08 AM RickD, I've got the same except for an Edelbrock pump and my fuel boils when hot. The gas line is also wrapped. Go figure. | ||