Alex_67
Sep 8th, 02, 10:46 PM
Sorry for the delay (esp. to HawaiianCamaro)! Here is my Cowl Tag:
09D K
ST 67-12637 NOR10502
TR 797-Z R-R
W2LGS 3SK
Engine Stampimg is T0912MK with no partial VIN, it is running now with a rochester quadrajet, original intake and headers.It is quite good pulling, but i cannot tell you ETīs as i live in good old europe, and raceways are not really close...
Heads are Double Humps with a 6190W stamping on one of the humps, still have to pull the valve covers for the casting numbers.
4-spd. Saginaw, casting is 3925656, stamping is R8D14, which makes me think its not a numbers matching one... It has also an patial VIN stamping on it: 18N590128 . i still do not know from which car it might have been pulled...
I tried hard to find some numbers on the 10-bolt rear end, but i was not able to, maybe just to much rust and paint on it. I just can imagine the first letter to be a "P".... It seems to be very short anyway, as i make 60 mph with 3600rpm in 4th... i will pull the diff cover and have a look later on..
And now the VIN, its not matching with the car as i found out... someone took it from an 67RS which he "killed", and riveted it to my car which had no reg. papers that time just for law purposes..... i found this out 2 months after purchasing the car... so here it is: 124377N119261. Someday i will find out the real VIN!
So, i realy would like to know what you guys think about my "67-dream", I am a happy and proud owner anyway!
[This message has been edited by Alex_67 (edited 09-09-2002).]
09D K
ST 67-12637 NOR10502
TR 797-Z R-R
W2LGS 3SK
Engine Stampimg is T0912MK with no partial VIN, it is running now with a rochester quadrajet, original intake and headers.It is quite good pulling, but i cannot tell you ETīs as i live in good old europe, and raceways are not really close...
Heads are Double Humps with a 6190W stamping on one of the humps, still have to pull the valve covers for the casting numbers.
4-spd. Saginaw, casting is 3925656, stamping is R8D14, which makes me think its not a numbers matching one... It has also an patial VIN stamping on it: 18N590128 . i still do not know from which car it might have been pulled...
I tried hard to find some numbers on the 10-bolt rear end, but i was not able to, maybe just to much rust and paint on it. I just can imagine the first letter to be a "P".... It seems to be very short anyway, as i make 60 mph with 3600rpm in 4th... i will pull the diff cover and have a look later on..
And now the VIN, its not matching with the car as i found out... someone took it from an 67RS which he "killed", and riveted it to my car which had no reg. papers that time just for law purposes..... i found this out 2 months after purchasing the car... so here it is: 124377N119261. Someday i will find out the real VIN!
So, i realy would like to know what you guys think about my "67-dream", I am a happy and proud owner anyway!
[This message has been edited by Alex_67 (edited 09-09-2002).]