Saw this car at work today. I was wondering if the numbers are in the data base yet. The numbers are as follows:
VIN# 124377N207690
Cowl tag:
67-12437 NOR107838
709-Z G-2
2LG 3SL
4P 5B
I could not see the date on trim tag, it was covered up by braces installed for road racing.
This particular car has a lot of options that do not appear on the trim tag, which makes me wonder if the trim tag has been changed or the car has been built with these rare options. The options it had were:
power windows
Deluxe interior
fold down rear seat
tilt wheel
rear window defroster
12 bolt rear end with square traction bar
The color has been changed to black with black deluxe interior.
The motor vin stamp does not match the car It is:
V0203MV 7L140696
The numbers off the trans are: P0216 B15281
This car is sweeeeeet, even if it has been modified from original.
graemlins/thumbsup.gif

This is what the VIN and Trim Tag says for the car:


1 = Chevrolet
2 = Camaro
4 = 8-cylinder engine
37 = coupe body
7 = 1967 model year
N = Norwood, OH assembly plant
207690 = vehicle serial number sequence

Decode for body number: 107838

No Build date given.
67-12437 = Standard Interior Coupe.
NOR = Built in Norwood Ohio.
709 = Standard Gold Bucket Seats.
Z = (A50) Strato Bucket Seats.
G-G = Car Color is Granada Gold

Options:
2L = (M20) 4-speed floor shifter
2G = (D55) Console front compartment
3S = (Z23) Interior Decor group
3L = (Z22) Rally Sport Package
4P = (L48) SS 350 or (L30) 327-275H
5B = (V31 & V32) Front and Rear Large Bumper Guards

Ken,
From my info, this car is a L30/M20 car not an SS. The tag and vin line up just fine, so I think that the options have just been added to the car.
Thanks for the engine and trans numbers, we did not have them in the data base smile.gif

Dan was the car for the Engine in the data base. Car is a Norwood car and the engine is a LOS one.

No, 7L140696 was not in the data base, but will be added now smile.gif

Hey guys, is it possible for an 327 car to have a 12 bolt rear end with a square traction bar? I couldn't find the numbers stamped on the axle tube, but I have the guys number and he said I can look for any numbers I want.

Ken,
Yes, L30/M20 cars could and did have 12 bolt axles with the radius rod. Check out: http://www.camaros.org/radiusrod.shtml