TeeToe,

Back in Dec or so you were dicussing putting a modified subframe on a 1st gen. Maybe using 2nd gen parts or redesign like front steer or rack and pinion.

Anyway what happened to that project?Do you still read this message board? If not has anyone heard from him?

Tony

------------------
obnoxious 67 camaro under construction. TH350/383 stroker w/ aluminum Edlebroc RPM heads,cam, and carb.

He's here a lot, and at the http://www.pro-touring.com forum.
David

------------------
Check my web page for First Gen Camaro suspension info:
David's Motorsports page (http://ourworld.compuserve.com/homepages/David_Pozzi/)
First Gen Suspension Page (http://ourworld.compuserve.com/homepages/David_Pozzi/first_gen_suspension.htm)
67 RS 327
69 Camaro Vintage Racer
65 Lola T-70 Chev 350 Can-Am Vintage Racer

[This message has been edited by davidpozzi (edited 10-20-2001).]

That was when i was going to purchase wayne Due's business, and start some lower budget frames to add to the product line. I have since been busy at my own T56 kits, LS1 engine mounts, and Cbb brake brackets, plus project 50/50, soi put it on the way back burner. It just isn't a priorty for me currently. My main idea was to build an aftermarket frame using Kyle Tuckers geomerty, tubular control arms, rack and pinion, and coil overs. It didn't happen, and i haven't the time to work it out.
Tyler

------------------
<A HREF="http://www.pro-touring.com/featured_cars/Camaro/Tyler_Beauregard/tyler_beauregard.htm" TARGET=_blank>
68-LT1-T56
</A>
<A HREF="http://www.pro-touring.com/featured_cars/Camaro/Tyler_Beauregard/tyler_beauregards_project_5050.htm" TARGET=_blank>
50-50
</A>

Anybody know how the new spindles are coming along??? pdq67

Id like to know about the spindle too.

Tony

------------------
obnoxious 67 camaro under construction. TH350/383 stroker w/ aluminum Edlebroc RPM heads,cam, and carb.