David,

I decided to get the part store to order me another m/c because of what you said about the other one. They ordered the same part # and look at the diffarence. If you don't remember the other one I'll post a pic of it. This one looks more like a Chevy m/c. Will this one be ok even though I don't have rear disc brakes? Thanks

http://images.cardomain.com/member_img_a/214000-214999/214503_83_full.jpg

That one is more like it but a little taller than the origonal master cyl. It should work fine though.
I have one very much like that on my 67, and have seen a fiew other Camaros with them.
David
http://ourworld.compuserve.com/homepages/David_Pozzi/master67_4whldisc.jpg

David,

That's what I needed to hear now I can paint it. The pic was a big help too. The one in the pic has a prop valve that I've never seen before. Thanks

The light colored valve on the MC is a "Safety Breaker" it absorbs "pressure spikes" in the system, is a low buck antilock brake type deal. Not something I can recomend though.
Below the MC is an adjustable Kelsey/Hayes L88 prop valve.
David

Thanks Dave,

Did you see my other post about steering parts price list? I hope you will respond to it. I know you told me to buy the 67 idler arm but I don't see the diffarence between that and the 68-69 idler besides the price. Over $100 for 67 and $35 for 68-69. Thanks again