I used the rear disc brakes from a Cady. I retrieved the combo valve that was attached to the frame under the fire wall. I was not able to "see" where all the brake lines ran because the car was just about flat on the ground. I took it off buy feel more than anything. Can anyone tell me where each line runs from the valve.
Thanks,
Guy

Most of them have a brake warning sensor wire in the middle, a large port on the side for front brakes, and two small ports for each front wheel.
The rear has one line from MC in the side and the rear outlet is in the center rear end of the valve, it should be the same size as the inlet.
David

------------------
Check my web page for First Gen Camaro suspension info:
David's Motorsports page (http://ourworld.compuserve.com/homepages/David_Pozzi/)
First Gen Suspension Page (http://ourworld.compuserve.com/homepages/David_Pozzi/first_gen_suspension.htm)
67 RS 327
69 Camaro Vintage Racer
65 Lola T-70 Chev 350 Can-Am Vintage Racer

Gotcha.
Thanks a bunch.
GUY