|
brichead Oct 25th, 01, 09:43 AM I am rebuilding the front end & was wondering if there is any reason to replace the centerlink. It doesn't appear to be a part that would wear out & need to be replaced. Am I wrong? Thanks for your help! Brichead davidpozzi Oct 25th, 01, 10:26 AM It doesn't wear out, but check it for being bent and check the holes for fit on the tapered joints that plug into it. The holes can be cleaned up if bad by using a tapered reamer at a machine shop. I think they are 7 degree taper. I have front end Moog part numbers listed on my suspension page. David ------------------ Check my web page for First Gen Camaro suspension info: David's Motorsports page (http://ourworld.compuserve.com/homepages/David_Pozzi/) First Gen Suspension Page (http://ourworld.compuserve.com/homepages/David_Pozzi/first_gen_suspension.htm) 67 RS 327 69 Camaro Vintage Racer 65 Lola T-70 Chev 350 Can-Am Vintage Racer SS67muscle Oct 26th, 01, 11:06 PM You could replace it with a 1 1/8" bar. I got one from a 74 nova for cheeeep. | ||