thanks to some help from DREID TC member, I put the rear in back into the Camaro. Only thing remaing is to reposition caliber bracket, set e brakes, install new pro valve, bleed system, fill rear end with new gear lube and put the tires back on. Should be back and running by the weekend. Pictures to follow.

Sounds good, I'm redrilling the rear caliper brackets to position the calipers at 9 and 3 tomorrow and should have mine back together too. Then it's new brake line time!

Keep us informed.

Mike

pics?

will get them up sometime this weekend

Decided where you are putting that Prop valve yet? I did it so I wouldn't have to cut any lines and just picked up the fitting off the MC. There are adapters to make that work included.
I'll check in with you next week - be glad to come back and finish it if you hit a snag.
- OUT

I think I am going to put her in the right at the Master. Most likely all I will have to do is disconnet the line from the Master to the existing pro valve and then the line in the pro valve that runs to the back brakes and put it inline. I think I should be good if I do that, need to go look and refersh my memory on the set up.