My drum spindles show some slight scoring on the bearing supprt surfaces ( if I'm describing this area correctly ) and I feel I should replace them in doing my brake upgrade. Rick's 1st Gen only shows used ones; Superior Spindles shows 2" drop or disc spindles. Where might I find new drim spindles?

Rick, a lot of places offer them....

CPU Car parts is one, and they're inexpensive. Decent people to deal with also. I like their prices. http://67.37.173.213/

Camaros & Classics has them also.....
http://205.197.94.63/Merchant2/merchant.mv?Screen=CTGY&Category_Code=Camaro+Steering+Knuckle

Rick, if you don't have any luck, I have a complete front drum setup (with spindles) from my 69. All in good shape. If needed, shoot me an e-mail.

Joe - thanks. They all list disc spindles which I think (?) I can shim since my adapter bracket is set up for drum spindles. I'm trying to fit 13" with C5 calipers inside a 16" rim. I don't want to grind but am willing to use a thin spacer. I guess I'll mock up and see. Plan B is 12" rotors.

Codi - thanks. In the next day or two I'll know what I need. I'll send you an email.

Hi Rick, you do not need to make anything. We will ship you a set of our spacers at no charge to you.

However Rick, because you do not have the spindles yet you may need to sand the spacer down a little depending on what disc spindles you buy.

We will ship them tomorrow.

Take care,

Todd!

Man Rick.... I totally brain farted on my reply. You specified DRUM spindles and all I looked for were spindles period. I didn't look just for drum spindles.
graemlins/clonk.gif

Sorry, Joe. You have to take second place to me in that area. I'm going to get a new set of disc spindles.

Codi - thanks for your offer.

Todd - thanks so much. Now if only some of the new taller spindles under development were available.