Can anyone tell me if the front subframe is bolted to the rear subframe on a 68 Camaro? Some people tell me it is welded but in some pictures it appears that there is a bolt and some type of bushing holding the front to the rear.
Thanks Dan

the front sub rame is bolted to the body. it also has bushing's and normaly they are toasted prety good! http://www.camaros.net/forum/smile.gif

no mater what you do with a project car, i always recomend replacing the bushings with a set of new one's. i like the urathane bushing's my self.

The front and rear subframes are separate. A good mod is to weld in subframe connectors, tying the front to the rear. I like solid subframe bushings and have the Global West aluminum ones. Their del-a-lum control arm bushings are top quality, too.

Just make sure before welding subframe connectors, it would be worth it to take to a frame shop and have them measure and straighten the body on a frame machine before welding it up. Of course, after bushings have been replaced, solid or not.

Everett 68/350/PG/11.90/115 mph