|
View Full Version : Need track width for 67 camaro!! Bryan's67' Mar 23rd, 01, 07:54 PM Hello all its been a while and I have been busy but I need to know what the track width is for a 67 camaro rotor to rotor. thanks for the help!! http://www.camaros.net/forum/biggrin.gif ------------------ 67' Camaro 408" BBC, 598 HP. th400 3500 stall 3.90 gears best of 11.50 @ 118 MPH (Street Driven) pdq67 Mar 23rd, 01, 08:33 PM Bryan's67', My '67's 12 bolt is 60.625" wide with axles pushed in tight and nothing on the axle flanges if I measured the thing right. pdq67 Bryan's67' Mar 23rd, 01, 09:46 PM Hey thanks for the info! I wonder if you have the front width as well, I am in the process of designing the front suspention for my new bumper to bumper chassis and I need to know how wide to make the wheels fit in the fender wells. http://www.camaros.net/forum/biggrin.gif ------------------ 67' Camaro 408" BBC, 598 HP. th400 3500 stall 3.90 gears best of 11.50 @ 118 MPH (Street Driven) pdq67 Mar 24th, 01, 05:34 AM No, I don't, but Wayne Due, Teetoe Jones or David Pozzi might have that info. I would like to know my width and compare it to the second gen's. subframe, tooo!! Bryan's67' Mar 24th, 01, 09:19 AM Hey Wayne or Teetoe, doy you have the front track the first gen? I am in need of it to compare my results to ensure that I have done the measuring right. thanks for the help!!!! http://www.camaros.net/forum/biggrin.gif ------------------ 67' Camaro 408" BBC, 598 HP. th400 3500 stall 3.90 gears best of 11.50 @ 118 MPH (Street Driven) Teetoe_Jones Mar 24th, 01, 04:40 PM Hey I'm not near my car right now (i'm in San Deigo) and i'll get it asafp. Tyler ------------------ <A HREF="http://www.pro-touring.com/featured_cars/tyler_beauregards_68_camaro/tyler_beauregard.htm" TARGET=_blank> 68-LT1-T56 </A> davidpozzi Mar 24th, 01, 08:19 PM I have a pamphlet "Camaro Illustrated Facts feature and specification manual". It states the track width of 59.0 Front and 58.9 Rear. This is most likely with the stock wheels on the car but I don't know if it's to the center of the tread, it probably is. anyway the front and rear are almost exactly the same. David ------------------ Check my web page for First Gen Camaro suspension info: David's Motorsports page (http://ourworld.compuserve.com/homepages/David_Pozzi/) First Gen Suspension Page (http://ourworld.compuserve.com/homepages/David_Pozzi/first_gen_suspension.htm) 67 RS 327 69 Camaro Vintage Racer 65 Lola T-70 Can Am Vintage Racer |