|
oldirtydiapa Nov 23rd, 03, 01:25 AM I am converting the stock v6 to a 350 block into a 86' camaro. Any suggestions on what springs I should sure. The 350 has decent power about 450hp I would a set of springs that would handle great on the turns if at all ppossible. If not then it is understood. Can anyone help?? :confused: thanx davidpozzi Nov 23rd, 03, 02:03 PM I've heard the Eibach front and rear springs are good for a third gen Camaro. Stock IROC would be the stiffest, the Eibach are lower by a little and rising rate springs. David DjD Nov 23rd, 03, 02:44 PM Get a new screen name!! Man I have changed plenty of them poop rags in my time, you must not think to highly of yourself!! ;) LOL welcome to TC!! Scott Reeves HSV Nov 24th, 03, 06:23 AM I have the same body style...thirdgen '82. I just installed the Eibach Pro-Kit 3801.140. This was the front & rear spring set. It gives you a 1" drop all the way around (and makes intalling the front springs MUCH easier...no coil compressor required). I'm very happy with them so far (I have about 30 miles of giving it to it). http://www.eibach.com/index1.htm Click on the Application Guide, and enter your info. TOMS69 Nov 24th, 03, 08:23 AM LMAO @ "them poop rags" too funny :D cpodeep Nov 25th, 03, 12:17 PM Toms69, Yeah..struck me the same way. :D I"m still laughing about it and my 17 year old son asked "What I was hysterically laughing at" I told him i would explain in a few years and we both could laugh. oldirtydiapa Nov 25th, 03, 01:31 PM thanx for the help have fun and keep smileing graemlins/waving.gif pdq67 Nov 25th, 03, 03:28 PM He, He!! I always liked it when my boy's firehose's would go off all over me and the wall before I could get them cleaned up enough ta cover them with a clean dipa... I quickly learned that it might take two clean dipa's to make the change... A clean wet one AND next, a clean one!!!!!!!! He, He!! Seems like yesterday to a shorter, pot-bellied, gray-haired old man nowadays... pdq67 | ||