Hello all,

I'm coverting my power brakes to manual. I'm installing a new master cylinder and pro valve. I can't figure out what size the stock lines are? I need to buy new lines. Are they 3/16 and 5/16?
Thanks Joe

HI Joe 69
i talk to baer today
and the stock brake line are OK to use for power and disk brakes
Larry :D

I think my power disc/drum is 5/16 to the drums and 1/4 to the discs.

Thanks everyone,

I took the old lines, cut the ends and put them in my flaring tool. The smaller lines from the master cylinder are 3/16 and the larger lines are 1/4. The old lines were short and I wanted to fabricate new steel lines.

I took a stupid pill today! Mine are 3/16 to the disc and 1/4 to the drums.....sorry!