jay web
Jun 29th, 00, 12:36 PM
I am planning to install the 13" baer brakes on my '69 along with 17 inch americans. Any reccomendations on f/r wheel width and backspacing? Tire sizes? Any ideas appreciated.
|
View Full Version : 17" AMERICAN RACING WHEEL F&R BACK SPACING jay web Jun 29th, 00, 12:36 PM I am planning to install the 13" baer brakes on my '69 along with 17 inch americans. Any reccomendations on f/r wheel width and backspacing? Tire sizes? Any ideas appreciated. RockyMtnRacer Jun 29th, 00, 02:22 PM I've got 17x7 fronts with 245/45/17's and 17x8 rears with 255/45/17's - backspacing is 4-1/2" all around. Everything fits fine with the car lowered 2". Check it out at my site below. ------------------ Scott '69 400SB, Richmond 5-speed; '99 HD Road King Classic www.geocities.com/sdenning1 (http://www.geocities.com/sdenning1) jay web Jun 29th, 00, 03:14 PM thanks for the info, RockyMtnRacer. great looking car. (bike, too) 69 Ragtop Jun 29th, 00, 08:56 PM I`m running 17x8 in the fronts with 4.5 back spacing and 17x9.5 inthe backs with 5.5 back spacing. With no fender mods. jay web Jun 30th, 00, 05:15 AM What size tires do you run, 69 RAGTOP? Mike67cam Jun 30th, 00, 02:12 PM RockyMtnRacer, Did you order the wheels with custom backspacing? I also have a Baer 13 inch front 12 inch rear set up on my 67 and have been looking at the TTII wheels. I thought only 4.25 and 4.75 B.S. are available as standard sizes for 7 and 8 inch wide wheels from American Racing. I was hoping to use the 17x8 with 4.75 B.S. The custom backspacing cost $$! Thanks [This message has been edited by Mike67cam (edited 06-30-2000).] RockyMtnRacer Jul 1st, 00, 09:51 AM The backspacing I got was the standard offering at the time(about 15 months ago). ------------------ Scott '69 400SB, Richmond 5-speed; '99 HD Road King Classic www.geocities.com/sdenning1 (http://www.geocities.com/sdenning1) 69 Ragtop Jul 2nd, 00, 08:24 AM Jay I`m running 245/45/17 in the fronts and 275/40/17 in the backs. I did have to custom order the wheels jay web Jul 3rd, 00, 02:03 PM ONE more question on the wheels- any ideas on the best place to buy? Would I have to buy custom offset wheels directly from American? thanks for the info. 69 Ragtop Jul 3rd, 00, 06:31 PM Jay Iv`e found that Sears was the best place for me to buy TT2. Then again I Live on a rock and I do work for them. |