I'm wanting to put a set of Centerline Auto Drag wheels on my 68. 15x7 with 215/70/15 tires up front and 15x8.5 with 275/60/15 on the rear. Centerline only offers 3.3125 or 4.875 inch backspacing. Which backspacing should I go with? I'm guessing the 4.875 since they are closer to 4.5 inch b/s that is most common. Also, they have a 15x5.5 inch wide wheel with only the 3.3125 backspacing available. Would this be an option? Thanks in advance.

Hey, I have those wheels on my car, with 205's in front and 265 in rear. For the rear though i dont know the backspacing, but that my tire is about 1/2 inch outside of the fender on both sides. If you want pics, I should have pics up by monday, so if you send me an email, ill reply back by monday with the pics. OR, you can see a side view of the car (not a very good shot) if you go to www.geocities.com/capitolstrokers (http://www.geocities.com/capitolstrokers) and its on the main page. I have the only 68 camaro in there. Sorry, i just checked the site right now, and i see that only the front wheels are shown. But ya send me an email then ill get those pics to ya.

[This message has been edited by sik68 (edited 10-10-2002).]