I have a set of Rally wheels 14x6jj code XB I am looking for a picture of the trim ring and the dimensions. I go to swaps meets but I don't know what I am looking for.

Thanks

Steve

Here you go.
http://ebay0.ipixmedia.com/abc/M28/_EBAY_99f3ea6add0405c521865198b10c623e/i-1.JPG

------------------
1967 Camaro coupe Deluxe interior LT-1 350 w/ 4spd. M-21 trans and 12 bolt rear.

http://images.cardomain.com/installs/214000-214999/214503_25_full.jpg

The only advice I can give you is be careful and don't buy a trim ring that is to deep. The ring will never sit flush against the outside of the rim.

I have 3" deep rings and they are about 1/4" to deep. I would shoot for 2 3/4".

Of course you can get shorter one's if that is the look you are going for.



------------------
-Funk
My '67 RS (http://www.funkconsulting.com/67camaro)