|
67stock Feb 25th, 01, 12:37 PM Alright I got an adjustable vacuum canister now I got the limiter plate set at about 8-9. Without it adjusted at all (limiter plate) turned all the way back does it give 20 degrees advance? Hope that made sence. I think it's fouling my plugs from too little advance. davidpozzi Feb 25th, 01, 01:36 PM search the engine and drivetrain section for a long post by Ignitionman, he outlines how to adjust your advance curve. Here, I found it for you. http://www.camaros.net/forum/Forum9/HTML/001099.html Pay particular attention to his post at the bottom of the first page, disregard the insults and bad language. I think his ignition advice is worth trying, he seems to know a lot about it. He just rubbed people the wrong way. David ------------------ Check my web page for First Gen Camaro suspension info: David's Motorsports page (http://ourworld.compuserve.com/homepages/David_Pozzi/) First Gen Suspension Page (http://ourworld.compuserve.com/homepages/David_Pozzi/first_gen_suspension.htm) 67 RS 327 69 Camaro Vintage Racer 65 Lola T-70 Can Am Vintage Racer [This message has been edited by davidpozzi (edited 02-25-2001).] | ||